Jack & Bore Pipe Installations for Road, Rail & Utility Crossings Nationwide
Crigger Power uses the jack and bore method to install steel casing for sewer lines, water mains, and conduit where surface cuts aren’t an option. This trenchless boring technique is ideal for utility crossings under highways, railways, and active infrastructure that demand straight-line accuracy and structural strength.
We combine hydraulic pipe jacking with horizontal auger boring to drive casing through compacted ground without disrupting the surface. Every bore is handled in-house—our crews, our gear, and our schedule—so there’s no waiting on subcontractors or outside equipment.
If your job requires exact grade, structural casing, and proven trenchless results, Crigger Power drills it clean and finishes it right.
Ground Conditions That Suit Jack & Bore
Jack and bore pipe installation works best in stable, compacted ground. At Crigger Power, we use this method when the soil profile supports straight-line bores without compromising line and grade. That includes jobs in clay, sand, loam, and engineered fill conditions where directional drilling might drift or trenching would cause collapse.
This trenchless boring method is a better solution in areas with consistent density and shallow cover. We often deploy jack-and-bore techniques on projects that cross under roads, railways, or utility corridors, where maintaining casing alignment is critical.
If your bore path runs through mixed soil or compacted ground, Crigger Power drills it clean, installs it right, and keeps the project moving without delays.
Other Trenchless Boring Services for Utility Crossings
Not every project calls for the same bore. When accuracy, casing support, and shallow-depth control are key, Crigger Power uses trenchless boring methods built for the terrain. We tailor each job based on soil type, grade specs, and site restrictions—without subcontracting or stalling the schedule.
The services below show how we install utility crossings under roads, railways, and active infrastructure where open trenching isn’t an option.
Jack & Bore FAQs
Jack and bore pipe installation is a trusted trenchless method used on projects where surface disruption must be avoided, but strict line and grade tolerances are non-negotiable. Clients often ask how this method compares to other trenchless techniques, what types of pipe it supports, and when it’s the best option for utility crossings.
Below, we answer the most common questions we receive about jack and bore installations—including equipment needs, project timelines, and Crigger Power’s in-house approach to planning and execution. For deeper insights, visit our full FAQs and Blog page.
Jack and bore is a trenchless method that uses a hydraulic jacking system to push steel casing horizontally through the ground, while an auger inside removes soil. This process creates a clean, straight tunnel for sewer, water, or conduit installations—ideal for road or railway crossings.
At Crigger Power, our crews build launch and exit pits, install casing pipe section by section, and maintain grade throughout the bore. It’s a controlled, low-disruption way to complete underground utility installs where open cutting isn’t allowed.
Jack and bore is ideal when your project calls for:
- Precise line and grade: Especially for gravity-fed sewer lines or water mains
- Minimal surface disruption: Common beneath roads, rail lines, and runways
- Shallow-depth crossings: Where HDD isn’t practical due to limited cover
- Steel casing requirements: Utility specs often call for jacked casing
This method is best suited for municipal, industrial, and DOT work. When the ground can’t be disturbed and the bore must be straight, jack and bore deliver clean results without rerouting or delays.
Jack and bore installations are commonly used for:
- Sewer mains and sanitary lines
- Water mains and stormwater systems
- Power conduit or telecom sleeves
- Gas pipelines that require steel casing
The method supports a wide range of utility types depending on the casing size and grade requirements. Crigger Power adjusts tooling, casing specs, and bore length based on your project’s utility and location needs.
Jack and bore offers excellent grade and alignment control when set up correctly. By using guide rails, hydraulic jacks, and precision augers, our crews maintain a straight bore path which is critical for gravity systems or tight easements.
Unlike HDD, which excels at curved paths, jack and bore is ideal for straight-line installations that must meet strict elevation and pitch requirements. Our experience and field-tested setup process help make sure that your bore stays on line from launch to exit.
Not with Crigger Power. We don’t subcontract any part of the bore. Every jack and bore project is completed in-house using our own rigs, pit equipment, and trained operators.
From plan review and permitting to launch pit setup and final pull, our crews handle everything. That gives you fewer delays, less risk of error, and a single point of contact for the full trenchless scope.
Contact Crigger Power for Pilot Tube Auger Boring
Crigger Power brings precision pilot tube boring to jobs where failure isn’t an option. We install sewer mains, water lines, and conduits across tight, sensitive sites using guided trenchless methods that consistently hit grade. There is no guessing, no delays—just clean, controlled bores.
From municipal sewer installs to utility crossings under roads or railways, we handle the full pilot tube auger tedious process in-house. That means our crews, our equipment, and full control over your bore from setup to final push. If your project demands accuracy and trenchless execution, we’re the team to get it done.
Contact us today and let’s start drilling it right.